Show simple item record

Files in this item

Thumbnail

Item metadata

dc.contributor.authorCloutier, Jonathan
dc.contributor.authorPiercey, Stephen J.
dc.contributor.authorLayne, Graham
dc.contributor.authorHeslop, John
dc.contributor.authorHussey, Andrew
dc.contributor.authorPiercey, Glenn
dc.date.accessioned2016-07-31T23:31:12Z
dc.date.available2016-07-31T23:31:12Z
dc.date.issued2015-08
dc.identifier211292354
dc.identifier3d081197-e965-4cca-803a-ffd626d1ea74
dc.identifier84938398342
dc.identifier.citationCloutier , J , Piercey , S J , Layne , G , Heslop , J , Hussey , A & Piercey , G 2015 , ' Styles, textural evolution, and sulfur isotope systematics of Cu-rich sulfides from the Cambrian Whalesback volcanogenic massive sulfide deposit, central Newfoundland, Canada ' , Economic Geology , vol. 110 , no. 5 , pp. 1215-1234 . https://doi.org/10.2113/econgeo.110.5.1215en
dc.identifier.issn0361-0128
dc.identifier.otherORCID: /0000-0002-9432-9880/work/29685350
dc.identifier.urihttps://hdl.handle.net/10023/9234
dc.description.abstractThe Whalesback Cu-rich volcanogenic massive sulfide deposit in the Newfoundland Appalachians is a highly deformed deposit found on a steep limb of a closed and boudinaged overturned fold. The deposit was intensely deformed at low temperature but medium pressure (>175 MPa) during the accretion of the composite Lushs Bight oceanic tract-Dashwoods terrane onto the Humber margin at ca. 480 Ma. The ore mineralogy consists of chalcopyrite, pyrrhotite, and pyrite with lesser sphalerite and trace Ag, Bi, and Hg tellurides. Four styles of sulfide mineralization are present: (1) disseminated (5%); (2) vein (50%); (3) breccia (25%); and (4) semimassive to massive (20%). Independent of mineralization style, massive pyrite and pyrrhotite (and some chalcopyrite) are commonly parallel to main S2 schistosity in the deposit, whereas late chalcopyrite piercement veins occur at a high angle to S2. The progressive increase in pressure and temperature produced a remobilization sequence wherein sphalerite was the first sulfide phase to cross the brittle-ductile boundary, followed by pyrrhotite and, finally, chalcopyrite. Maximum temperature was not high enough for the pyrite to cross the brittle-ductile boundary. Instead, pyrite grains were incorporated and transported by pyrrhotite and chalcopyrite during the ductile remobilization events, rounding and fracturing them. Remobilization of the sulfides occurred mainly by plastic flow, but some solution transport and reprecipitation is locally observed. In situ secondary ion mass spectrometry sulfur isotope geochemistry of sulfides yielded values of δ34S ranging from 2.7‰ to 4.7‰ for pyrite, 2.1‰ to 4.0‰ for pyrrhotite, and 1.3‰ to 4.7‰ for chalcopyrite. Sulfur isotope modeling suggests that at least 60% of the sulfur was derived from leaching of igneous rocks (i.e., basalts), with the remainder derived from thermochemical sulfate reduction of seawater sulfate during alteration of the basalts by seawater. At the deposit scale, sulfur isotopes retained their original signature and did not reequilibrate during the secondary deformation and remobilization events.
dc.format.extent16475796
dc.language.isoeng
dc.relation.ispartofEconomic Geologyen
dc.subjectEconomic Geologyen
dc.subjectSulphur Isotopesen
dc.subjectVMS depositen
dc.subjectQE Geologyen
dc.subjectNDASen
dc.subject.lccQEen
dc.titleStyles, textural evolution, and sulfur isotope systematics of Cu-rich sulfides from the Cambrian Whalesback volcanogenic massive sulfide deposit, central Newfoundland, Canadaen
dc.typeJournal articleen
dc.contributor.institutionUniversity of St Andrews. Earth and Environmental Sciencesen
dc.identifier.doi10.2113/econgeo.110.5.1215
dc.description.statusPeer revieweden
dc.date.embargoedUntil2016-08-01


This item appears in the following Collection(s)

Show simple item record