Design of a spline horn for a W-band gyro-TWA

A spline horn for use in a W-band gyro-TWA was design and manufactured. The horn was designed to have a high Gaussian content over the whole operating frequency band of 90-100 GHz. It also had a low reflection of the TE11 mode and high directivity.

Citation

Zhang , L , He , W , Donaldson , C R , Cross , A W , Robertson , D , Hunter , R & Smith , G 2017 , Design of a spline horn for a W-band gyro-TWA . in Proceedings of IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016 . , 7873995 , Institute of Electrical and Electronics Engineers Inc. , pp. 154-155 , 9th IEEE UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016 , Qingdao , China , 5/09/16 . https://doi.org/10.1109/UCMMT.2016.7873995

conference

Publication

Proceedings of IEEE 9th UK-Europe-China Workshop on Millimetre Waves and Terahertz Technologies, UCMMT 2016

DOI

https://doi.org/10.1109/UCMMT.2016.7873995

Type

Conference item

Rights

© 2016, IEEE. This work has been made available online in accordance with the publisher’s policies. This is the author created accepted version manuscript following peer review and as such may differ slightly from the final published version. The final published version of this work is available at https://doi.org/10.1109/UCMMT.2016.7873995

Description

This work was supported by the Engineering and Physical Sciences Research Council (EPSRC) U.K. under Research Grant EP2K029746/1, and Science and Technology Facilities Council (STFC) U.K. under Research Grants ST/K006673/1 & ST IK006703/1, ST 1N002326/1 & ST 1N002318/1

Collections

University of St Andrews Research

URI

http://hdl.handle.net/10023/15797