Green perovskite distributed feedback lasers
MetadataShow full item record
A visible perovskite distributed feedback laser is fabricated for the first time. Through the use of nanocrystal pinning, highly luminescent methylammonium lead bromide films are used to produce stable lasers emitting at 550 nm, with a low threshold of 6 µJcm−2. The lasers were able to support multiple polarisations, and could be switched between transverse magnetic and transverse electric mode operation through simple tuning of the distributed feedback grating period.
Harwell , J R , Whitworth , G L , Turnbull , G A & Samuel , I D W 2017 , ' Green perovskite distributed feedback lasers ' Scientific Reports , vol 7 , 11727 . DOI: 10.1038/s41598-017-11569-3
Copyright The Author(s) 2017. This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
DescriptionThis work was supported by the Engineering and Physical Sciences Research Council (EPSRC) of the UK Grants; EP/K503162/1, EP/M506631/1, EP/M025330/1 and EP/L017008/1. IDWS acknowledges funding from a Royal Society Wolfson research merit award.
Items in the St Andrews Research Repository are protected by copyright, with all rights reserved, unless otherwise indicated.