Show simple item record

Files in this item

Thumbnail

Item metadata

dc.contributor.authorMangano, Enzo
dc.contributor.authorKahr, Juergen
dc.contributor.authorWright, Paul
dc.contributor.authorBrandani, Stefano
dc.date.accessioned2017-04-20T23:33:25Z
dc.date.available2017-04-20T23:33:25Z
dc.date.issued2016-10-01
dc.identifier.citationMangano , E , Kahr , J , Wright , P & Brandani , S 2016 , ' Accelerated degradation of MOFs under flue gas conditions ' , Faraday Discussions , vol. 192 , pp. 181-195 . https://doi.org/10.1039/C6FD00045Ben
dc.identifier.issn1359-6640
dc.identifier.otherPURE: 242702760
dc.identifier.otherPURE UUID: e27939b3-3400-4257-afa0-e9c21423ff87
dc.identifier.otherRIS: urn:A950154E5420DD4DEA6BC17091044196
dc.identifier.otherScopus: 84994378382
dc.identifier.otherWOS: 000386310900010
dc.identifier.otherORCID: /0000-0002-4243-9957/work/62668247
dc.identifier.urihttps://hdl.handle.net/10023/10636
dc.description.abstractThe zero length column (ZLC) technique is used to investigate the stability of Mg- and Ni-CPO-27 metal organic framework (MOF) crystals to the presence of water and humid flue gas. The design of the ZLC enables the stability test to be conducted over a considerably shorter time period and with lower gas consumption than other conventional techniques. A key advantage over other experimental methods to test the stability of adsorbents is the fact that the ZLC allows to quantify the amount adsorbed of every component present in the gas mixture. The developed protocol is based on a two-stage stability test. The samples were first exposed to a humid carbon dioxide and helium mixture in order to study the effect of water on the carbon dioxide adsorption capacity of the samples. In the second stage the samples were exposed to a flue gas mixture containing water. From the preliminary water stability test, the Ni-sample exhibited the highest tolerance to the presence of water, retaining approximately 85% of its pristine CO2 capacity. The Mg-MOFs deactivated rapidly in the presence of water. The Ni-CPO-27 was then selected for the second stage of the protocol in which the material was exposed to the wet flue gas. The sample showed an initial drop in the CO2 capacity after the first exposure to the wet flue gas followed by a stabilisation of the performance over several cycles.
dc.language.isoeng
dc.relation.ispartofFaraday Discussionsen
dc.rightsCopyright 2016 the Authors. This work is made available online in accordance with the publisher’s policies. This is the author created, accepted version manuscript following peer review and may differ slightly from the final published version. The final published version of this work is available at https://dx.doi.org/10.1039/C6FD00045Ben
dc.subjectQD Chemistryen
dc.subjectNDASen
dc.subject.lccQDen
dc.titleAccelerated degradation of MOFs under flue gas conditionsen
dc.typeJournal articleen
dc.description.versionPostprinten
dc.contributor.institutionUniversity of St Andrews. School of Chemistryen
dc.contributor.institutionUniversity of St Andrews. EaSTCHEMen
dc.identifier.doihttps://doi.org/10.1039/C6FD00045B
dc.description.statusPeer revieweden
dc.date.embargoedUntil2017-04-20


This item appears in the following Collection(s)

Show simple item record